XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Remove the screw for the front engine pad.
Remove:
-
the oil pipe for the steering gear from the snap fasteners along the sub-frame
-
the screw clip for the steering gear return line
-
the fuel line for the engine block heater and the engine block heater (if applicable) on the left side of the sub-frame.
Remove the 4 screws holding the torque rod to the engine.
Remove the anti-roll bar links from the anti-roll bar on both sides. Counterhold using a Torx wrench so that the ball joint boot is not damaged.
Removing the drive shaft