XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Remove the rubber mountings for the exhaust pipe.
Remove the connector for the heated oxygen sensor (HO2S) from its mounting.
Removing the sub-frame
Position a lifting table under the sub-frame
Remove the following on both sides:
-
the screws holding the sub-frame brackets in the bodywork
-
the screw for the sub-frame mounting.
Carefully lower the sub-frame.
Note! Ensure that the brake pipe clears the exhaust pipe mounting when lowering the frame.
Note! Ensure that the steering gear screws release from the sub-frame.
Transferring components