Volvo Workshop Service and Repair Manuals

Apply a little petroleum jelly to the sensor O-rings.
Install the solenoid.

Note! The small guide lug on the solenoid should be upwards on installation.

Twist and press in the solenoid so that it bottoms in the control system.

Install:

-

the spring clamp. Check that the spring clamp is locked

-

the connector.

Installing the side cover on the transmission

See Side cover transmission, installing See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic Transmission
Components/Side Cover Transmission, Installing.

Solenoid Lock-Up Function, Replacing

Solenoid lock-up function, replacing

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.

Removal

Preparatory work

See: Side cover transmission, removing See: Automatic Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic Transmission
Components/Side Cover Transmission, Removing.

Removing the lock-up solenoid