XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Apply a little petroleum jelly to the sensor O-rings.
Install the solenoid.
Note! The small guide lug on the solenoid should be upwards on installation.
Twist and press in the solenoid so that it bottoms in the control system.
Install:
-
the spring clamp. Check that the spring clamp is locked
-
the connector.
Installing the side cover on the transmission
See Side cover transmission, installing See: Service and Repair/Removal and Replacement/Automatic Transmission Components/Side Cover
Transmission, Installing.
Solenoid Lock-Up Function, Replacing
Solenoid lock-up function, replacing
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.
Removal
Preparatory work
See: Side cover transmission, removing See: Service and Repair/Removal and Replacement/Automatic Transmission Components/Side Cover
Transmission, Removing.
Removing the lock-up solenoid