XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Apply a little oil to the oil filter pipe before installing it.
Press the filter into place in the transmission. Check that it is secure.
Install the oil pan
Install the screws. Tighten to 10 Nm.
Note! The gasket can be reused once.
Drain off the remaining oil in the torque converter and the oil cooler
Note! Disconnect the oil return line at the transmission and install a plastic hose. Drain off the old oil.
Remove the screw nipple on the oil return line from the connection. Counterhold in the transmission
Pull out the oil pipe.
Install a plastic hose on the oil return line
Plug the connection in the transmission.
Install a transparent plastic hose on the oil return line. Clamp the hose into place in the sub-frame.