volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 6742 > < Procedures|Page 6740
Page 6
background image

Lower the car

Tighten the nut for the oil pipe bracket. Tighten to 25 Nm.

Finishing work

Pour the rest of the oil into the transmission

Note! If the transmission is over filled with oil, there may be operational problems. The oil must be filled to the correct level.

The total oil volume of the transmission is 11.9 liters.
Measure the amount of oil that was drained. Refill with the same amount of new oil (approximately 11 liters).
Start the engine. Move the gear selector through all the gear positions. Then move the gear selector lever to position P.

Note! Carry out the following check at an oil temperature of 85° ± 5° C.

Check the oil level

Check the oil level according to Oil level, checking See: Service and Repair/Procedures/Oil Level, Checking.

Procedures|Page 6742 > < Procedures|Page 6740