volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Relays and Modules - A/T > < Fluid Pump, A/T|Service and Repair|Page 6766
Page 3
background image

Note! Ensure that mating surfaces are clean.

Note! Use lint free paper.

Lift and turn the pump slightly so that it is centered on the pump shaft.
Finger-tighten the screws. The two upper screw heads (206) are sized 10 mm. The other screw heads (207) are 8 mm.
First tighten the screws crosswise to light contact.
Tighten the upper screws. Tighten to 16 Nm. Tighten the other screws. Tighten to 12 Nm.

Installing the side cover on the transmission

Install the side cover. See Side cover transmission, installing See: Service and Repair/Removal and Replacement/Automatic Transmission
Components/Side Cover Transmission, Installing.

Filling with transmission fluid

Fill with transmission fluid. See Transmission oil/oil filter, replacing See: Fluid Filter - A/T/Service and Repair.
Test drive the car.

Relays and Modules - A/T > < Fluid Pump, A/T|Service and Repair|Page 6766