volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Gasket/O-Ring Servo Cylinder, Replacing|Page 6839 > < Gasket/O-Ring Servo Cylinder, Replacing|Page 6837
Page 4
background image

Suck up the oil from the transmission using an oil suction device.
Take out a container for the oil.
Raise the car.

Remove:

-

the splash guard under the engine. Blow and wipe clean around the transmission oil trough

-

the transmission oil trough. See Transmission oil / oil filter, replacing See: Fluid Filter - A/T/Service and Repair.

Removing the accumulator housing from the transmission

Note! Check the routing of the oil pipe in the accumulator housing.

Remove the oil filter. See Transmission oil / oil filter, replacing See: Fluid Filter - A/T/Service and Repair.
Slacken off the 4 screws holding the accumulator housing in the transmission.

Fold down the housing with the oil pipes. Remove the oil pipes from the accumulator.

Disassembling the accumulator housing

Gasket/O-Ring Servo Cylinder, Replacing|Page 6839 > < Gasket/O-Ring Servo Cylinder, Replacing|Page 6837