volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Control System/Valve Housing, Removing|Page 6947 > < Control System/Valve Housing, Removing|Page 6945
Page 9
background image

Distribution plate

Remove the locking pin (368) (can be reused).
Lift up the distribution plate together with gasket C.

Note! Do not damage the two small strainers on the distribution plate.

Lift out gasket V.

Checking and reinstalling the balls in the valve housing

Control System/Valve Housing, Removing|Page 6947 > < Control System/Valve Housing, Removing|Page 6945