volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Control System/Valve Housing, Removing|Page 6984 > < Control System/Valve Housing, Removing|Page 6982
Page 15
background image

Use Volvo Genuine parts petroleum jelly P/N 116 11 51-4 so that the balls remain in the relevant ducts during the installation of the valve housing.

Transferring

Balls 373 (two). Apply petroleum jelly to each duct. Install the balls (the petroleum jelly should cover the balls).
Balls 372 (four). Apply petroleum jelly to each duct. Install the balls.

Checking the balls in the valve housing

Control System/Valve Housing, Removing|Page 6984 > < Control System/Valve Housing, Removing|Page 6982