XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Apply a little petroleum jelly to the solenoid O-ring.
Install:
-
the solenoid by pressing it. Guide the solenoid in so that the locating pin on the side locates in the cut-out
-
the spring clamp. Check that the spring clamp is locked
-
the connector.
Installing the side cover on the transmission
See Side cover transmission, installing See: Service and Repair/Removal and Replacement/Automatic Transmission Components/Side Cover
Transmission, Installing.
Solenoid Shifting 2-3, Replacing
Solenoid shifting 2-3, replacing
Removing the side cover from the transmission
See Side cover transmission, removing See: Service and Repair/Removal and Replacement/Automatic Transmission Components/Side Cover
Transmission, Removing.
Removing solenoid S2
