XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Seals and Gaskets: Service and Repair
Pinion Seal Bevel Gear, Replacing
Pinion seal bevel gear, replacing
Special tools:
999 5069 EXTRACTOR See: Tools and Equipment/999 5069 Extractor
999 5504 PRESS TOOL, DRIVE FLANGE See: Tools and Equipment/999 5504 Press Tool, Drive Flange
999 5652 Counterh. See: Tools and Equipment/999 5652 Counterh.
999 5653 Punch See: Tools and Equipment/999 5653 Punch
999 5893 Puller See: Tools and Equipment/999 5893 Puller
999 7058 Adapter See: Tools and Equipment/999 7058 Adapter
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Remove the propeller shaft according to:
Removal
Removing the nuts for the bevel gear flange
Mark the position of the flange and nut in relation to the pinion shaft's end.
Remove the nut.
Use counterhold: 999 5652 Counterh. See: Tools and Equipment/999 5652 Counterh. together with adapter: 999 7058 Adapter See: Tools and
Equipment/999 7058 Adapter.
Removing the flange
Remove the flange. Use: 999 5893 Puller See: Tools and Equipment/999 5893 Puller.
Check the seal face on the flange.
Replace the flange if it is damaged.