XC90 AWD L6-2.9L Turbo VIN 91 B6294T (2004)
Install the flange according to earlier marking, see: Removing the nuts for the bevel gear flange.
If necessary, use press tool: 999 5504 PRESS TOOL, DRIVE FLANGE See: Tools and Equipment/999 5504 Press Tool, Drive Flange.
Installing a new nut in the carrier
Install a new lubricated nut.
Note! There must be no axial play.
Caution! 200 Nm must not be exceeded. The forces on the pinion bearing may become too great, causing it to seize.
Tighten to 180-200 Nm. Use counterhold: 999 5652 Counterh. See: Tools and Equipment/999 5652 Counterh. together with adapter: 999 7058 Adapter
See: Tools and Equipment/999 7058 Adapter.
Filling and checking oil
Fill and check the oil level in the bevel gear.
Use transmission oil 1161648 (1 liter).
Tighten the level plug according to: See: Automatic Transmission/Transaxle/Specifications/Mechanical Specifications/Tightening Torque
Finishing
Install the propeller shaft according to: