volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Wipers - Shudder or Noisy Operation|Page 20817 > < Windshield Washer Switch|Service and Repair|Page 20808
Page 1
background image

Wiper Arm: Customer Interest
Wipers - Shudder or Noisy Operation

NO: 32-01

DATE: 2-11-2003

MODEL: 
XC90 MY 2003-

CHASSIS: 
N/A

SUBJECT: 
Wiper Adjustment

REFERENCE: 
SB 36-0022, Tool Bulletin 136, TNN 19-05, SMB 19-0001

DESCRIPTION:

Under certain conditions the windshield wipers may shudder or create noise during operation.

The procedure documented in Service Bulletin 36-0022, Wiper Adjustment is applicable to the XC90.

SERVICE:

If a customer complaint is consistent with the above description perform the following:

Adjusting the wiper arm

Check that the wipers are in the parked position. Switch the wipers on and off again with the ignition switched on. Fold out the wiper arm. Remove the 
wiper blade.

Install the tool (A) (P/N 9512931) loosely on the wiper arm (B) as illustrated.

Carefully fold the wiper arm and tool towards the windshield.

Note:

The base of the tool must be in contact with the windshield

Tighten the tool (A) to the wiper arm (B) using screw (C).

XC90

Read the angle of the wiper arm to the windshield for both the driver and passenger side from the scale on the tool.

Wipers - Shudder or Noisy Operation|Page 20817 > < Windshield Washer Switch|Service and Repair|Page 20808