XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Applies to cars with three rows of seats
-
Tape the cable (2) to the wire and route it on at the rear edge of the side panel.
Applies when the rear side panel must be removed to facilitate cable routing. Remove:
-
four covers.
-
four screws.
-
one clip.
-
Detach the C and D panels at the lower edge.
-
Pull the side panel away and lift it off.
Applies to cars with two rows of seats
-
Route the cable on the left-hand side of the seat belt's mounting at the front edge of the wheel housing, inside the carpet at the front edge of the
side panel, between the side panel and the rear cargo floor support, to the tailgate.
