XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Battery Tray: Service and Repair
Battery compartment, removing
The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.
Removing the battery compartment
Remove components. See Rear section, exposing .
If necessary, remove:
-
the outer rear section. See Rear section outer, replacing
-
the rear bumper rail. See Bumper rail rear, replacing
-
the inner rear section. See Rear section inner, replacing
Determine the extent of the damage. See Body seal and Body side, alignment chart .
Grind off the spot welds.
Pry off the battery compartment.
Grind clean.
Apply welding primer.
Installing the battery compartment
Secure the replacement part.
Weld into place.
Install:
-
the inner rear section. See Rear section inner, replacing
-
the rear bumper rail. See Bumper rail rear, replacing
-
the outer rear section. See Rear section outer, replacing .
Seal. See Body seal .
Note! For this type of damage, the whiplash system must be checked. See Whiplash unit, checking .