XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Note! Use any of tools 999 5575, 999 5576 and 951 2564.
Installing the wiring for the heated oxygen sensor (HO2S)
Lift up the sub-frame slightly (approximately 50 mm from the car body).
Install the bracket for the heated oxygen sensor (HO2S) on the subframe (does not apply to diesels).
Install the heated oxygen sensor (HO2S) wiring on the right hand side of the sub-frame (applies to 6- cylinder engines only).
Lifting the sub-frame
Lift the sub-frame up completely. At the same time locate the mounting screws for the steering gear on the sub-frame and, on right-hand drive cars, the
screw for the collision protection system.
