XC90 AWD L6-3.2L VIN 98 B6324S (2007)
Reinstall the screws holding the engine mounting to the engine. Tighten to 35 Nm. Angle-tighten 90°.
Note! Use new screws.
Installing the vibration damper (6-cylinder engines only)
Install the vibration damper using new screws. Tighten to 35 Nm. Angle-tighten 50°.
Use the crankshaft center nut as a counterhold.
Tightening the screws for the lower torque rod
Tighten the 4 screws (A) for the lower torque rod. Tighten to 50 Nm.
Applies only to diesels:
