XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Remove:
-
the 7 screws of the coolant pump
-
the coolant pump; scrap the gasket.
Installation
Note! For tightening torques, see: See: Engine/Specifications/Mechanical Specifications/Tightening Torque
Installing the coolant pump
Clean the gasket surface for the coolant pump.
Install:
-
a new gasket
-
the coolant pump
-
the 7 M6 screws. Tighten.
Installing the coolant pump belt pulley
Position the belt pulley but do not tighten the screws.
