volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Wheels and Tires > < Maintenance Required Lamp/Indicator|Description and Operation|Page 5776
Page 1
background image

Malfunction Indicator Lamp: Description and Operation

Emissions Warning Lamp 

The emissions warning lamp in the Driver Information Module (DIM) has a warning symbol.

This warning symbol varies depending on the market. The warning symbols are:

-

"Engine symbol" (not USA)

-

"CHECK ENGINE" (MIL - Malfunction Indicator Lamp, USA only).

The warning lamp lights when the ignition key is turned to position II. The warning lamp will go out after approximately 15 seconds or if the engine is
started when no fault is found in the engine management system.

If Readiness is not complete (certain diagnostic functions not completed), the warning lamp will flash instead of going out when the ignition key is in
position II.

The warning lamp will light if there is a fault in one of the parameters in the engine management system. The warning lamp will also light in response to
a request transmitted via the control area network (CAN) if there is a fault in the transmission control module (TCM) which affects emissions.

Wheels and Tires > < Maintenance Required Lamp/Indicator|Description and Operation|Page 5776