XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Ignition Coil: Service and Repair
Ignition coil, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the engine covers
Remove the upper engine covers by pulling straight up.
Removal of ignition coils, cylinder 1, 3, 5 and 7 (bank 1)
Remove:
-
the 4 connectors from the ignition coils
-
the 4 screws of the ignition coils
-
the 4 ignition coils of the cylinders.
Removal of ignition coils, cylinder 2, 4, 6 and 8 (bank 2)
Remove:
-
the 2 screws of the cable harness
-
the retaining screw of the upper engine cover.
Carefully bend aside the cable harness.
Remove:
-
the 4 connectors from the ignition coils
-
the 4 screws of the ignition coils
-
the 4 ignition coils of the cylinders.
Installation
Note! For tightening torques, see: Tightening torque, B8444S See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
Specifications/Tightening Torque.