volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Communications Control Module|Service and Repair > < Reading and Clearing Diagnostic Trouble Codes|Page 364
Page 48
background image

Audio Module (AUD)

Downloading software and replacing the control module

New software can be downloaded into the audio module (AUD). When ordering software, the hardware and the software in the car is compared to the
information in the Volvo central database. If the comparison is OK the software is downloaded to the control module.
If the comparison between the car and Volvo central database is not OK, the database is updated with the car configuration. When this is complete the
software is downloaded.
The control module is under the right-hand front seat. The seat must be removed to replace the control module
After replacing the control module, the unique serial numbers of the control module are checked by the infotainment control module (ICM). The
installed control module will not work if the serial number is incorrect.
Try turning the ignition off and on if there are problems after the software is downloaded and the control module is not working.
The MOST network is used for a total software reload.

Multimedia Module (MMM)

Downloading software and replacing the control module

New software can be downloaded into the multimedia module (MMM). When ordering software, the hardware and the software in the car is compared to
the information in the Volvo central database. If the comparison is OK the software is downloaded to the control module.
If the comparison between the car and Volvo central database is not OK, the database is updated with the car configuration. When this is complete the
software is downloaded.
All the software required for the traffic information system to work in the control module is on the DVDs.
The control module is under the left front seat.
After replacing the control module, the unique serial numbers of the control module are checked by the infotainment control module (ICM). The
installed control module will not work if the serial number is incorrect.
Try turning the ignition off and on if there are problems after the software is downloaded and the control module is not working.
The MOST network is used for a total software reload.

Communications Control Module|Service and Repair > < Reading and Clearing Diagnostic Trouble Codes|Page 364