XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Place the module on the two embossings in the floor leaving a clearance for the seat frame of at least 5 mm.
Use: Control module, 30769225
Remove the protective tape for the Velcro attachments and install the control module.
Install the cable mounting for the connection at the sill, fuel pump and module as well as the mounting in the floor.
Use: Cable harness, 30724838
Check the cover seal for faults and check that the cables are in the cut-outs.
Check that the plugs are in the seal.
Install the cover and tighten to 6 Nm.
Mark and make a hole for the module in the insulation block.
