XC90 AWD V8-4.4L VIN 85 B8444S (2005)
-
the left-hand side panel using the screws and cover. Tighten the screws in the load securing eyelets. Tighten to 24 Nm (18 lbf.ft.)
-
the covers for the load securing eyelets
-
The D-post panel with the connector
-
the connector for the rear roof lighting (if applicable)
-
the rear headlining
-
the C-post panel.
Finishing work
-
Turn the ignition key to position II
-
Reconnect the battery negative lead
-
Reinstall the left-hand folding panel and the left floor hatch
-
Reinstall the floor hatches and the storage compartment
-
Program the software according to the service information in VIDA.