XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Remove:
-
the 6 screws
-
the splash guard under the engine
Removing the oil pressure sensor
Unplug the connector from the sensor.
Remove the oil pressure sensor from the engine block.
Hint: Catch any oil spills with paper or the like.
Installation
Note! For tightening torques, see Specifications, B8444S See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
Specifications/Tightening Torque.
Installing the oil pressure sensor
Install the oil pressure sensor. ApplyLoctite 962to the sensor and tighten as specified: Tightening torque, B8444S See: Engine, Cooling and
Exhaust/Engine/Specifications/Mechanical Specifications/Tightening Torque.
Plug in the connector to the oil pressure sensor.
Installing the splash guard under the engine