XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Evaporator Temperature Sensor / Switch: Service and Repair
Temperature sensor evaporator, replacing
As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential
information in the illustrations is always correct.
Included in this method are methods for:
-
temperature sensor evaporator left-hand drive (LHD). See replacing
-
temperature sensor evaporator right-hand drive (RHD). See replacing.
Temperature sensor evaporator left-hand drive (LHD), replacing
Removing the temperature sensor for the evaporator from left-hand drive cars
Remove the soundproofing panel. See Soundproofing panel, replacing See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Soundproofing Panel, Replacing.
Pull off the temperature sensor.
Disconnect the connector from the sensor.
Work the sensor loose.
Installing the temperature sensor for the evaporator in left-hand drive cars
Install the connector on the sensor.
Press the temperature sensor into place.
Install the soundproofing panel. See Soundproofing panel, replacing See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Soundproofing Panel, Replacing.
Temperature sensor evaporator right-hand drive (RHD), replacing
Removing the temperature sensor for the evaporator
