XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Remove:
-
the M6 screw at the heat shield of the position sensor
-
the connector from the position sensor
-
the 1 M6 screw
-
the position sensor.
Installation of position sensor, cylinder 2, 4, 6 and 8 (bank 2)
Note! For tightening torques, see: Tightening torque, B8444S See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
Specifications/Tightening Torque.
Install:
-
the position sensor; tighten the screw
-
the connector for the position sensor
-
the heat shield of the position sensor; tighten the screw.
Installing the upper rear engine cover
Position the upper rear engine cover and press it into place in the mountings.
Installing the upper cross stay