XC90 AWD V8-4.4L VIN 85 B8444S (2005)
Tap off the constant velocity joint housing.
Use a brass drift.
Note! Only tap the inner ring. Take care not to damage the bearing race or outer ring.
Cleaning the constant velocity joint housing
The joint can be cleaned when assembled. See Cleaning the constant velocity joint housing - continued.
If the joint needs to be disassembled, see Cleaning / checking the outer constant velocity joint.
Cleaning the constant velocity joint housing - continued
Thoroughly clean off any dirt and grease from the joint. Blow the joint dry.
For greasing/assembling see Assembly.
Note! Inner bellows may not be serviced.
For greasing/assembling see Assembly.
Cleaning/checking the outer constant velocity joint
Marking the constant velocity joint