XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Alarm Horn: Service and Repair
Siren, replacing
Removal
Removing the siren
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
-
Deactivate alarm
-
Turn the front wheels to the right
-
Drill out the rivets at the front edge of the fender liner. See
-
Remove the plastic nuts from the protective panel in the fender liner. Remove the protective panel
-
Disconnect the molding and front edge of the fender liner. Move the fender lining and molding out of the way.
-
Slacken off the screw for the siren bracket. If a security screw is used to secure the bracket, use nut nippers
-
Lift the siren and angle it outwards so that the catches release
-
Disconnect the connector.