XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Note! This bracket must be replaced with a new one.
Remove:
-
the 4 screws
-
the bracket for the handle by pressing it forwards from the inside.
Installing the handle on the outer front side door (with deadlocking)
Note! For tightening torques, see Specifications See: Specifications.
Install:
-
the bracket for the handle
-
the 4 M5 screws. Tighten
-
the bracket on the outside of the door
-
the handle.
Press back the upper link mounting so that the handle is secured.
Install:
-
the links between the outer handle and the lock
-
the cover
-
1 M5 screw. Tighten
-
the glass guide
-
the 2 blind rivets
-
weatherstrip.
Hint: Work in the weatherstrip using a little soap.
Install:
-
the side window. See Window front side door, replace See: Front Door Window Glass/Service and Repair
-
the run-off profile
-
the door panel. See Panel front side door, replacing See: Front Door Panel/Service and Repair.