XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Install:
-
the connector for the mass airflow sensor (MAF)
-
hose clip for air bellows
-
connectors to engine control module (ECM)
-
nut in front left wing.
Install:
-
the fresh air intake hose
-
screws, 2 pcs, for fresh air hose in front plate
-
cover over air cleaner.
Checking the oil level
Connect the diagnostic equipment and read the transmission fluid temperature continuously.
Start the engine.
Note! Leave the engine running during the entire check.
Note! The following measure must be carried out quickly to avoid overheating the fluid.
Run through all the positions between P and D on the gear selector. Stop at each position for at least 2 seconds. Perform this process twice.