XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Displays which frequency band, AM or FM, is selected.
The parameter can be read when the radio is selected as the source.
Antenna selection
Displays which antenna, main antenna or subantenna, is in use.
The parameter can be read when the radio is selected as the source.
Region
Displays the region for which the antenna is configured.
EU=Europe
USA=USA
AUS=Australia
JPN=Japan
Parameters, value
Track
Displays the current track on the CD disc.
The parameter can be read when the media player is selected as the source.
Frequency
Displays which frequency is set.
The parameter can be read when the radio is selected as the source.
Signal strength
Obtaining radio signal strength readings.
The value read applies to the active antenna. The signal strength is presented as a figure between 0 and 255. The figure 0 means that no signal has been
registered. The figure 255 means that the highest possible signal strength has been registered.
The parameter can be read when the radio is selected as the source.
Noise level
Reading the radio signal noise level.
The value read applies to the active antenna. The noise level is presented as a figure between 0 and 15. The figure 0 means that no noise has been
registered. The figure 15 means that the highest noise level that can be registered has been reached.
The parameter can be read when the radio FM band is selected as the source.
Description of Component/Function Activation
Description of component/function activation
Frequency band AM/FM FM
Selecting the frequency band FM.
The radio must be selected as sound source.
Frequency band AM/FM AM
Selecting the frequency band AM.
The radio must be selected as sound source.
Antenna selection, Main antenna
Selecting the Main antenna.
The radio must be selected as the sound source and FM selected as the frequency band.
Antenna selection, Subantenna
Selecting the Subantenna.
The radio must be selected as the sound source and FM selected as the frequency band.
