XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Ignition off
-
Expose the multimedia module (MMM).
Connect adapter 951 2882 10-pin adapter See: Tools and Equipment/951 2882 10-Pin Adapter to the control module connector (wiring side). Connect
breakout box 951 1428 Breakout box See: Tools and Equipment/951 1428 Breakout Box to the adapter. Multimedia module (MMM) terminals
#B1-#B10 correspond to terminals #1-#10 on the breakout box. Connect adapter 951 1508 Adapter 10-7-5 pin See: Tools and Equipment/951 1508
Adapter 10-7-5 Pin to the control module connector (wiring side). Connect breakout box 951 1428 Breakout box See: Tools and Equipment/951 1428
Breakout Box to the adapter. Multimedia module (MMM) terminals #A1-#A5 correspond to terminals #21-#25 on the breakout box.
The breakout box is designed to facilitate reading off the control module input and output signals when the control module is connected and cable and
component resistance when the control module is disconnected. The use of a breakout box reduces the risk of accidentally short-circuited cables and
damage to the connectors
Disconnecting breakout box
In reverse order.
Note! Before the control module can be checked and readings taken, the removed fuses must first be installed.
Other information
-
For information about signals, see Signal specification See: Pinout Values and Diagnostic Parameters/Signal Description/Signal Description,
Multimedia Module (MMM).
-
For further information about the fuses and ground point, see the Wiring Diagram.
Connection of Breakout Box, Integrated Audio Module (IAM)
Connecting the breakout box
Special tools:
951 2977 IAM adapter See: Tools and Equipment/951 2977 IAM Adapter
951 1428 Breakout box See: Tools and Equipment/951 1428 Breakout Box
951 1499 Cable See: Tools and Equipment/951 1499 Cable
981 3190 Replaced by 9511428 See: Tools and Equipment/981 3190 Replaced by 9511428
Connecting the breakout box
