XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
Remove the protective film from one side of the double-backed tape.
-
Install the tape on the four holders.
-
Remove the remaining protective film on one of the holders.
-
Install the centering tool in the holder acc. to the illustration.
-
Press in the holder in the bumper casing.
Note! The holders shall be installed facing in the direction as shown in the figure. The holders must be installed horizontally and in line
with the bumper casing.
-
Repeat the steps 47-48 for the other holders.
