volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Oil Pressure Sensor|Service and Repair|Page 3203 > < Component Location, Engine Control Module (ECM)|Page 3199
Page 1
background image

Oil Pressure Sensor: Service and Repair

Replacing the oil pressure sensor

Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.

Removing the oil pressure sensor

Remove the hose from the charge air pipe.

Remove:

-

the screw for the charge air pipe in the cylinder block

-

the connector from the oil pressure sensor

-

the oil pressure sensor. Use a long 24 mm socket.

Place paper underneath in case of oil leakage.

Installing the oil pressure sensor

Oil Pressure Sensor|Service and Repair|Page 3203 > < Component Location, Engine Control Module (ECM)|Page 3199