XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Turn Signal Switch: Service and Repair
Turn signal switch, replacing
Removal
Turn signal lamp and dip switch
-
Ignition off
-
Remove the upper and lower steering column covers. See Replacing the steering column covers See: Steering and Suspension/Steering/Steering
Column/Steering Column Cover/Service and Repair
-
Remove the 2 screws for the switch
-
Remove the rubber boot.
Note! The pins on the switch are fragile.
-
Carefully pull the switch straight out.
Installation
Turn signal lamp and dip switch
-
Install the rubber boot.
Note! The pins on the switch are fragile.
