GVL L4-1116cc 1.1L SOHC VIN 2 2-bbl (1988)
Wiper Switch: Service and Repair
Windshield Wiper Switch
1.
Disconnect battery ground cable.
2.
Center steering wheel and front wheels.
3.
Pry horn button off steering wheel.
4.
Remove horn button spring.
5.
Remove steering wheel attaching nut.
6.
Mark position of, then remove steering wheel.
7.
Remove upper and lower steering column covers.
8.
Loosen windshield wiper switch retaining clamp.
9.
Disconnect electrical connectors at and remove switch.
10.
Reverse procedure to install.
