3.2CL V6-3.2L SOHC (2003)
11.
Screw the battery clamp bolt into the timing belt adjuster boss to hold the adjuster in its current position. Tighten the bolt by hand; do not use a
wrench.
12.
Loosen the timing belt idler pulley.
13.
Remove the intake and exhaust rocker arm assemblies from the front cylinder head:
^
To avoid damaging the valves or the rocker arms, loosen the rocker shaft mounting bolts two turns at a time, in the sequence shown.
^
When you remove the rocker arms, leave the mounting bolts in the rocker shafts. This helps to keep the springs and arms on the shafts.