acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Campaign - Front Camshaft Replacement|Page 2272 > < Campaign - Front Camshaft Replacement|Page 2269
Page 1
background image

Camshaft: Recalls
Campaign - Front Camshaft Replacement

02-033

November 11, 2002

Applies To: 
2003 3.2CL - From VIN 19UYA424.3A000135 thru 19UYA424.3A009909 and

- From VIN 19UYA425.3A001004 thru 19UYA425.3A009434

Product Update: 2003 3.2CL Front Camshaft

BACKGROUND

On certain 2003 3.2CLs (except Type-S), the front camshaft was made to an incorrect design specification. Because of this, there can be a slight loss of
power at engine speeds over 4,000 rpm.

CUSTOMER NOTIFICATION

All owners of affected vehicles will be mailed a notification of this product update. An example of the notification letter is shown in this service bulletin.

Not all of the vehicles in the listed VIN range are affected by this campaign. Before beginning work, verify that the vehicle is eligible by checking at
least one of the following:

^

The customer has a notification letter.

^

The vehicle is shown on your campaign responsibility report.

^

The vehicle is shown as eligible on a VIN Status Inquiry using the iN.

CORRECTIVE ACTION

Replace the camshaft in the front cylinder head.

PARTS INFORMATION

Camshaft Kit (includes the front camshaft, and all necessary engine gaskets): P/N 14100-P8E-999

WARRANTY CLAIM INFORMATION

Operation Number:

110154

Flat Rate Time:

3.0 hours

Failed Part:

P/N 14100-PGE-A00

Defect Code:

5CL

Contention Code:

L74

Template ID:

02-033A

Skill Level:

Repair Technician

REPAIR PROCEDURE

1.

Make sure you have the audio system anti-theft code and the navigation system security code (if equipped). Write down the customer's radio
station presets.

2.

Disconnect the battery, and remove it from the vehicle.

Campaign - Front Camshaft Replacement|Page 2272 > < Campaign - Front Camshaft Replacement|Page 2269