3.2CL V6-3.2L SOHC (2003)
Clutch Slave Cylinder: Service and Repair
Clutch Slave Cylinder Replacement
NOTE:
-
Use fender covers to avoid damaging painted surfaces.
-
Do not spill fluid on the vehicle; it may damage the paint; if brake fluid does contact the paint, wash it off immedeiately with water.
1. Write down the frequencies for the radio's preset buttons. Disconnect the negative (-) cable first, then the positive (+) cable from the battery.
Remove the battery.
2. Remove the mounting bolts (A) and the slave cylinder (B).
3. Remove the roll pins (C). Disconnect the clutch line (D), and remove the O-ring (E). Plug the end of the clutch line with a shop towel to prevent
brake fluid from coming out.