3.2TL TYPE S V6-3.2L SOHC (2002)
Alarm System Transponder: Service and Repair
Immobilizer Receiver Unit Replacement
NOTE: The PCM dose not need to be reprogrammed if only the receiver has been replaced.
1. Remove the driver's dashboard lower cover.
2. Remove the steering column covers.
3. Disconnect the 5P and 7P connectors (A) from the immobilizer receiver unit (B).
4. Remove the screws (C) and the immobilizer receiver unit from the ignition key cylinder (D).
5. Install in the reverse order of removal.
6. After replacement, check the immobilizer system.
