3.2TL TYPE S V6-3.2L SOHC (2002)
13. From Mode 1, disconnect the special tool from the multiplex control inspection connector for about 10 seconds, then reconnect it. The ignition
key light should come on and the beeper should beep for 2 seconds, then blink and beep twice more at 0.2 second intervals. This means the system
has gone from Mode 1 to Mode 2.
NOTE: To cancel mode 2, disconnect the SCS service connector from the multiplex control inspection connector for more than 10 seconds or
turn the ignition switch OFF.
Multiplex Control Unit, Passenger's
Multiplex Control Unit, Driver's
