3.2TL TYPE S V6-3.2L SOHC (2002)
Glove Compartment: Service and Repair
Glove Box Removal/Installation
SRS components are located in this area. Review the SRS component locations and the precautions and procedures in the SRS section before performing
repairs or service.
NOTE: Take care not to scratch the dashboard and related parts.
1. Remove the screw, then remove the damper (A) from the glove box.
2. While holding the glove box, remove the glove box stop (C) on each side.
3. Remove the screws, then remove the glove box.
4. Remove the passenger's front console cover.