3.2TL TYPE S V6-3.2L SOHC (2002)
Memory Positioning Module: Testing and Inspection
Driving Position Memory System (DPMS)
Control Unit Input Test
1. Before testing the driving position memory control functions, troubleshoot the multiplex control system. Perform the multiplex mode test first.
Multiplex Control Unit, Passenger's:
2. Remove the passenger's multiplex control unit from the passenger's under-dash fuse/relay box, and disconnect its connector.
3. Inspect all connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 4.
