3.2TL TYPE S V6-3.2L SOHC (2002)
18. Pull the knuckle outward, and remove the driveshaft outboard joint (B) from the knuckle (A) by tapping the driveshaft end (C) with a plastic
hammer, then remove the knuckle.
19. Separate the hub (A) from the knuckle (B) using the special tool and a hydraulic press. Take care not to distort the splash guard. Hold onto the hub
to keep it from falling when pressed clear.
20. Remove the snap ring (A) and the splash guard (B) from the knuckle (C).
