3.2TL TYPE S V6-3.2L SOHC (2002)
2. Tighten the nuts in two or three steps. In the final step, tighten all nuts, in sequence, to 12 Nm (1.2 kgf-cm, 8.7 ft. lbs.).
3. Install the intake manifold.
4. Install the six ignition coils.
5. Install the wire harness holder, then secure the bolts (J32A2 engine).
6. Install the Intake Manifold Runner Control (IMRC) actuator (A), then connect the IMRC actuator connector (B) (J32A2 engine).
7. Install the Power Steering (P/S) hose clamp (C).