3.2TL TYPE S V6-3.2L SOHC (2002)
5. Install the throttle cable, then adjust the cable.
6. Install the cruise control cable, then adjust the cable.
7. Install the intake air duct (A), then install the vacuum hose (B) and breather pipe (C).
8. Install the Evaporative Emission (EVAP) canister hose (D).
9. Tighten the bolt (A) securing the TCS control valve bracket. Connect the TCS control valve angle sensor connector (B), TCS control valve
actuator connector (C) and water bypass hoses (D) on the TCS control valve assembly (J32A2 engine).