3.2TL TYPE S V6-3.2L SOHC (2002)
Compressor Clutch: Testing and Inspection
Type S
Compressor Clutch Circuit Troubleshooting
Type S Model
1. Check the No. 58 (30 A) fuse in the under-hood fuse/relay box. No. 14 (7.5 A) in the passenger's under-dash fuse/relay box, and the No. 3 (7.5 A)
fuse in the driver's under-dash fuse/relay box.
Are the fuses OK?
YES - Go to step 2.
NO - Replace the fuse(s), and recheck.
2. Check the engine coolant temperature.
Is the coolant temperature above normal?
YES - Troubleshoot and repair cause of high engine coolant temperature.
NO - Go to step 3.
3. Remove the compressor clutch relay from the under-hood fuse/relay box, and test it.
Is the relay OK?
YES - Go to step 4.
NO - Replace the compressor clutch relay.
4. Measure the voltage between the No. 1 terminal of the compressor clutch relay 4P socket and body ground.
Is there battery voltage?
YES - Go to step 5.
NO - Replace the under-hood fuse/relay box.
5. Connect the No. 1 and No. 2 terminals of the compressor clutch relay 4P socket with a jumper wire.
Does the compressor clutch click?
YES - Go to step 6.
