3.2TL TYPE S V6-3.2L SOHC (2002)
Evaporator Case: Service and Repair
Heater-Evaporator Unit Replacement
Evaporator Removal and Installation
1. Recover the refrigerant with a recovery/recycling/charging station.
2. Disconnect the suction (A) and the receiver (B) lines from the evaporator. Plug or cap the lines immediately after disconnecting them to avoid
moisture and dust contamination.
3. Remove the glove box and the glove box cover.
4. Remove the wire harness connectors (A) from the evaporator. Disconnect the connector (B) from the evaporator temperature sensor.