acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Except Type S|Page 10341 > < Except Type S
Page 2
background image

9. Measure the voltage between the No. 11 terminal of climate control unit connector B (20P) and body ground.

Is there about 5 V?

YES - Check for loose wires or poor connections at climate control unit connector B (20P) and at the A/C pressure switch 2P connector. If the
connections are good, substitute a known-good climate control unit, and recheck. If the symptom/indication goes away, replace the original climate
control unit.

NO - Repair open in the wire between the climate control unit and the A/C pressure switch.

10. Using a Backprobe Set, measure the voltage between the No. 27 terminal of PCM connector A (32P) and body ground with the PCM connectors

connected.

Is there about 5 V?

YES - Repair open in the wire between the PCM and the A/C pressure switch.

NO - Check for loose wires or poor connections at PCM connector A (32P). If the connections are good, substitute a known-good PCM, and
recheck. If the symptom/indication goes away, replace the original PCM.

11. Check for proper A/C system pressure.

Is the pressure within specifications?

YES - Replace the A/C pressure switch.

NO - Repair the A/C pressure problem.

Except Type S|Page 10341 > < Except Type S